Milk Curve Detailed Report (Stall)

The Detailed report (stall) presents the milking efficiency per stall for all the valid cows milked with that group.

Note: Valid stalls are stalls with more than 5 valid cows; valid cows are only cows with AMT for first attachment ≥ 2.6 min

To open the Detailed report (stall)

Click View, then select Main Report and Detailed report (stall).

The detailed report opens below and displays the milking data per stall in the milking parlor, in each session. Select the row in the Milking Curve report to open the detailed session data below:

Indicator	Description
Stall	Stall number
Number of cows	Value indicates number of cows milked at the stall in the selected session.
Yield	Total stall yield in the highlighted session.
Milk 2 min	Milk produced at the stall in the first 2 minutes.
% Milk 2 min.	Displays the percentage of milk harvested in the first 2 minutes, out of the total milk yield. Note: This header provides data only for those cows with a yield >4 kg and without a second attachment. *Target value:45%
Avg % milk 2 min.	Displays the percentage of milk harvested in the first 2 minutes, out of the total milk yield. Note: This header provides data for all milked cows, including those with a second attachment.
AMT	Displays the Actual Milking Time (from attachment to cluster removal). *Target value: less or equal to Target AMT.
AMT Target	Displays the calculated highest expected milking time (claw-on time) according to the farms milk production.
Flow rate	0-15 - Flow rate (kg/minute) for the first 15 seconds of milking. 15-30 - Flow rate (kg/minute) between 15-30 seconds of milking. 30-60 - Flow rate (kg/minute) between 30-60 seconds of milking. 60-120 - Flow rate (kg/minute) for the second minute of milking.
Milk/cow	Yield divided by number of milked cows.
Low Flow Time	Total time the cows were milked at a low flow rate (<1kg/2.2lbs per minute. Sum of Pre-low flow time and Low flow time at removal). *Target value: less than 1 minute.
Low flow %	Percent of time the cows were milked at a low flow rate (<1kg/2.2lbs per minute). *Target value: less than 20%.
Pre-low flow time	Time from Start Milking, until flow reached 1kg/2.2lbs per minute. Long Pre-low flow time is an indication of poor preparation of cows for milking.
Low flow time removal	Time at the end of the milking once flow rate dropped below 1kg/2.2lbs per minute. Long low flow at removal indicates machine set-up problem (Removal delay too long).
Milking bimodality	Displays the number of milked cows that meet the bimodality threshold.
"Peak" flow rate	Group's average peak flow rate.
"Peak time"	Group's average peak time.
Multiple Att	Number of milked cows for which the cluster was attached more than once.
Unnecessary attach.	Number of attachments when the amount of milk harvested during the last attachment is below 1kg.
Irregular take off	Number of times cluster was manually removed and/or removed after cancellation of ACR.